BILL OF MATERIALS

If you need information or advice on the most suitable materials for your project, please do not hesitate to send us a request. We will respond with personalized recommendations to offer you the ideal material according to your needs.

If none of the suggested materials are what you are looking for, please contact us and we will find the most suitable option for you. We work with various suppliers, which allows us to offer you the most suitable and quality material for your project.

CONTACT US

  • PLA

    PLA (polylactic acid) is a biodegradable material derived from natural resources, in particular it is obtained from starch extracted from corn, sugar beet and wheat. With a wide variety of colors.

  • PLA CF

    PLA reinforced with carbon fiber. Greater mechanical resistance than normal PLA and with a beautiful matte finish.

  • HANDLE

    Material resistant to high ambient temperatures (86ºC) and resistance to UV rays, ideal for outdoor applications. Available in a multitude of colors with a matte finish.

  • TPU 98A

    High resistance flexible material, recommended for technical applications with impact resistance, resistance to greases, oils and solvents. Available in many colors .

  • TPU 92A

    Similar to TPU 98A but with lower hardness. Also available in a multitude of colors.

  • TPE 90A - 96A

    Softest material in the catalog, appropriate for parts that require high flexibility. Matte finish, with low degree of moisture absorption and low gas permeability

  • PETG

    Material with excellent resistance-price ratio. Ideal for applications with intermediate mechanical and thermal resistance. Available in a multitude of colors and finishes.

  • PETG V0

    Material with the same characteristics as PETG but with added value, it has UL94/V0 certification, which allows the use of the manufactured parts in electrical contact, self-extinguishing.

  • PETG CF

    PETG reinforced with carbon fiber which increases the mechanical resistance of the pieces.

  • ABS

    Ideal material for industrial applications with high
    mechanical and thermal stresses. Available in many colors.

  • PC/ABS

    It is a filament made of the two most commonly used polymers in the industry: PC and ABS. It is a very resistant material that is ideal for printing parts that need to withstand impacts for long periods of time.

  • NONOILEN

    NonOilen is a 100% biobased material, developed from polymers from renewable sources. Due to this composition, this filament is fully biodegradable.

  • CPE CF112

    Carbon fiber reinforced CPE, excellent mechanical properties and good surface finish.

  • PC/PBT

    Material with great impact resistance (even at low temperatures) and good chemical resistance.

    It is an ideal filament for applications requiring resistance to intermittent contact with lubricants, solvents, fuels, oils and other chemicals.

  • IGLIDUR I-150

    Material with low coefficient of friction. Recommended for use in contact with moving parts.